what the reason of hiring carpet cleaning service?

The feeling you get from having your carpets cleaned is like no other. Which often begs the question, “why didn’t we do it sooner?” Well, most often, then not, that is the case; most people wait too long to have their carpets cleaned.

Carpeting is expensive, so you want to maintain your carpet long term. Keeping carpet clean is an ongoing project, but with time and dedication you can have clean carpeting for years to come. Regular cleaning is key. Vacuuming and professional cleaning are important for a clean carpet. Take action to prevent stains, such as removing your shoes in the home. Work on preventing damage to the carpet by avoiding certain habits, like rubbing stains and using carpet powders.

dubai carpet cleaning, abu dhabi carpet cleaning , sharjah carpet cleaning
al ain carpet cleaning


carpet cleaning
Deep Cleaning Your Carpet
STEP 1
Buy or rent a carpet-cleaning machine. The deepest stains and toughest odors can be removed with a carpet-cleaning machine, which uses hot water and a chemical cleaner to wash the fibers of your carpet.
Carpet-cleaning machines can be rented from home and garden stores, Walmart, and specialty vacuuming or carpet stores.
Carpet-cleaning machine rentals come with cleaning solution and stain removal treatment. It’s important to know what kind of carpet you have before renting a machine, so you can ensure that you use the proper cleaning solution for your carpet.
You may also wish to hire a professional to come to your house and use the cleaner to clean your carpet for you.
STEP 2
Vacuum the carpet. Make sure it is completely free of all loose dust and dirt before you start the deep cleaning treatment. Sweep the dirtiest parts of the carpet to kick up dirt before vacuuming.
STEP 3
Pre-treat stained areas. Most carpet-cleaning rentals come with a solution that is meant to be applied to stained areas before the deep cleaning is conducted. If you don’t have a stain remover solution, spray stained areas with vinegar instead.
STEP 4
Add water and cleaning solution to the machine. Follow the directions that came with your machine to add the appropriate amounts of hot water and carpet cleaner.
In some cases the water and solution are each held in their own tank; as instructed, remove the tanks and fill them with water or cleaner.
Make sure the tanks are properly fitted on the machine before proceeding.
STEP 5
Plug in the machine and clean your carpet. Run the machine slowly over the carpet, making sure to cover every inch. You may overlap areas that have already been cleaned to be sure you don’t miss a spot. On some machine models you will see dirty water splash into a receptacle when the machine is working properly.
If the machine runs out of water or cleaning solution, turn it off and unplug it. Discard the dirty solution, rinse the tanks, and fill them with clean hot water and cleaning solution.
Dirty solution may be poured into the toilet.
STEP 6
Allow your carpet to dry. Within a few hours it should look and smell good as new.